After some amount of time the ITS Column Analysis and Design (ITS-CAD) is reaching its Version 3.0.0. A lots of improvement is added, yet it is still not yet able to be redistributed. It is still far from being able to publish worldwide. Note the GUI and Engine is now separated and has its own version. In the future both version is not the same. This is due to deploying the GUI takes some times while the Engine is developed surprisingly very fast. A dynamic link library (dll) in which can be used by using VS Console Program (VB or VC#) and some documentation will be provided in the near future. Below some improvement on ITS-CAD and its Engine.
ITS-CAD V3.0.0 Revision List:
Version 3.0.0 (16 May 2014)
– Lots of Change in Menu and Analysis.
– Additional Plasticity Model for Stress-Strain Purpose, Interaction Diagram, Moment Curvature.
– FRP Confined Analysis for Column.
– NetGen Mesher for 2D Sectional FEM is Added.
Version 2.9.1 (21 March 2014)
– New Coordinate System Implemented
– Center of Gravity is Added
Version 2.9.0 (20 March 2014)
– Modulus Elasticity Option Added (SNI 2847-2002/ACI 318 1999/ACI 318 2011/AS 3600 2009/Carrasquillo)
– Concrete Density is Added
– Save Menu Updated 2.9.8
Version 2.8.9 (19 March 2014)
– Active Stress Strain Model Has Been Added
Version 2.8.8 (6-Oct 2013)
– I10, I5 and R5-10 Calculation
Version 2.8.7 (5-Oct 2013)
– Axial-Moment (Combined) Ductility Ratio
Version 2.8.6 (5-Oct 2013)
– Display Menu Improved
Version 2.8.5 (5-Oct 2013)
– Save Menu 2.8.5
Version 2.8.4 (1-Oct 2013)
– Axial Ductility Ratio
Version 2.8.3 (29-Sep 2013)
– Open Menu Updated
Version 2.8.2 (28-Sep 2013)
– Remarks added in the GeneralM.Vb
Version 2.8.1 (24-Sep 2013)
– Concrete Menu added for Beta1 Calculation.
Version 2.8.0 (22-Sep 2013)
– General Information Menu improved for open and save function.
Engine ITS-CAD V3.0.0 Revision List
15-May-2014 [V-3.0.0]
– Samani Attard Empirical Model Is Added (Inclussion of Size Effect).
– Cui Sheikh Model Is Added (Intended For FRP Application).
– FRP with Plasticity Stress-Strain Model is Implemented.
– Additional Changes in Dilation Rate of Plasticity Model is Added.
30-March-2014
– Input for Mesh Preparation Net-Gen Implemented
– Plasticity Model is Added (Piscesa-Attard-Samani)
21-March-2014
– New Coordinate System Implemented
– Center Gravity is added
20-March-2014
– Added the Material Parameter, Modulus of Elasticity of Concrete
– SNI2847-2002, Carrasquillo, ACI 318 2011/AS3600 2009
19-March-2014
– Revision on Razvi (1999) both rectangular and circular where previously fl are being summed on each iteration lead to overloaded fl.
This has been fixed by adding the fl=0 before its calculation.
– Checking Legeron Paultre Model
The Journey 
thanks